For the Die handling in upending and down ending, there are follow type equipments helps to safety and efficicency handling.
A. DIE FLIPPER AND LIFT TABLE
This is an equipment with two hydraulic upending table for shifting and turning the Die 180 and 360 degree.
The version of the die flipping table vary from the die size, shape and handling degree…
The Max.Loading weight can be upto 50T
B. 90 DEGREE DIE FLIPPER IN MECHNICAL
The basic equipment in the die flipping operation, easy maintainment .
C. HYDRAULIC DIE FLIPPER FOR HEAVY LOADING
This version of die flipper is manily for high speed and lower operation level.
Normally, the working table of the hydraulic die flipper is hieght 400-600mm that is more easy handling the die on floor by crane of fork. And the hydraulic system is fast too. But the system need more maintainment job in the pipping , value and hydralic system checking.
1.1 Performance Parameter
| N/M | Model |
| FPFT-30 | |
| Voltage | AC420V,50Hz |
| Flipping Speed | 90s (Adjustable) |
| Flip Degree | Standard or adjusting angle of turning：90° |
| Flip Object | Max weight：10T/20T/30T |
| Max flip angle：90° | |
| Machine working table Size | L2000mm*W2000mm OR CUSTOMIZED |
| Machine Weight | App. 5.5T 6.5T 8.5T |
| Work Noise | ≤80DB |
| Environmental condition | Wet≤98%，Temp 0±40℃ |
II.Machine TestSpec
█ 2.1 Machine Design
█ 2.2 Flip Step Diagram
In order to use this machine safely, please read this page carefully before machine using.
- You must read this information before using the machine.
- Do not exceed the maximum allowable loading.
- Please do not enter the operation area during machine running. Do not put your hands and feet into the operating area of the device.
- Please confirm the action area of the machine before the operation of the machine.
- Do not dismantle the safety features of the machine.
- In order to prevent damage to the machine with the mold, the speed should be lower than 2.5cm/s when using the crane to release the mold.
- Do not remove the warning sign on the machine.
- Do not remove the mechanical cover and safety bridge.
- Keep power off when machine in maintenance and spot inspection.
- Before machine operation, must be with safety equipment, such as safety helmet, safety shoes, etc.
For the die flipping machine: