Door Packing Machine

Application

JL2300-D Door packaging machine was special designed for the sealing shrinking, such as door, window, wooden, profile and panel. It is wrapped with PE stretch film that the goods looks tidier and more stable. The main purpose of the machine is keeping the goods in a good condition against water, dirt and stained, etc.

Feature

1. This door packing machine can be combined with an automatic production line for shrink wrapping.

2. Adopting photo electricity for setting the products.

3. The sealing width is adjustable for different products.

4. It will seal other three sides automatically with PE, POF film on rolls.

5. Constant temperature heat sealing and cutting system is suitable for PE, PVC, POF etc., industrial standard shrink films.

6. The sealing of door packing machine is firm and nice.

7.This door packing machine is provided with high speed hot air circulating shrink tunnel

8. The feed speed is adjustable, combines a worktable at the end of the tunnel, which makes whole machine runs automatically.

9. . Both automatic and manual feed-in modes are available.

10. It is designed with sealing system which adopts permanently heated seal bar and easy-exchangeable sealing blade without odorous. And the temperature is controlled and detected by PLC.

 

Technical Data

 

1.Sealing part

Control: PLC

Structure Material: Carbon steel

Length: 1500-3000mm

Width: 910-1350mm

Height: 70-150mm

Height of Working Table: app. 800mm

Conveyor speed: app. 6-12m/min

Sealing Type: Three Sides

Packing Material: PE/POF/PVC film with reserve pore

Sealing part power consumption: app.6KW

Power Supply: 380V

Air Supply: 6~8kgf/cm2 2. Shrinking part

Structure Material: Carbon Steel

Length:4500mm

Shrinking tunnel:3500mm

Shrinking Side: W 1600mm x 300mm

Heating Power Consumption: App.35Kw

Calorific: 4PCS

Cooling Fans: 1 Group

Drive Part: Frequency control Motor

Conveyor speed: app. 6m/min

Temperature: 120℃-200℃

Packing Material: PE/POF film with reserve pore.

Power Supply: 380V

Specification

Power: AC 380V

Heating mode: Mainly by circular heating, direct heating supplemented

Heating power: 20kw

Conveying power: 0.75kw

Blower power: 0.18kw*4

Temperature scope: <220

Conveying mode: Chain, Stainless steel mesh, Teflon mesh

Conveyer height: 880mm

Max conveying weight: 100kg

Conveying speed: 0-8m/min, controlled by the inverter

Tunnel dimensions: L3000mm W1200mm H300mm

Overall dimensions: L4600mm W1300mm H1500mm

Machine weight: About 850kg

Cooling device: One group

Suitable materials: PE or POF